Lean Training Consultancy.

 

Posts Tagged ‘visual management’

Quick Wins from 5S

Wednesday, December 1st, 2010

Written By: Paul Steven – KCTS Lean Consultant

5S has many specific definitions for each “S”. I prefer, Sort, Set in Order, Shine, Standardise & Sustain. All five should be applied together in sequence using Plan-Do-Check-Act (PDCA) to drive a virtuous circle of improvement. PDCA means that rather than gaining perfection in a single cycle of 5S, success is found by repeating and learning from 5S through using it everyday. 

5S may be introduced by itself, but for quick wins I suggest you include the introduction of Standardised Work in conjunction with your 5S programme. Standardised Work is a subject entire books are written to describe and I shall endeavour to discuss it regularly whilst I blog. But as a start, the principle behind Standard Work is that if all people complete repetitive tasks in the same way each time they complete it and describe their methods so that others can do it identically then everyone who follows that method will have the same problems in executing it perfectly. Describing the method including symbols, drawings and photographs it is known as Standardised Work. As we strive for perfection in the method we can try to both understand and solve the problems involved in reaching perfection. Every time we solve a problem, we update the Standardised Work with the improved method and train everyone who uses it to ensure the maximum benefit from the improvement is felt. It is the fastest way to create a learning organisation where everyone’s problem solving is targeted for everyone’s benefit. Let’s look at how 5S and Standardised Work can compliment each other.  

When applying Sort for the first time you can have a number of benefits quickly whether using Standardised Work or nor. In addition to the removal of obviously unneeded items and engagement of allowing people to set their own standards at work, the biggest opportunities come from red tagging. Red tagging can be done using actual red tags or anything that you agree identifies items which may not be required. At the moment of tagging we just don’t know if the item in question is needed. The red tagging is your opportunity to deal with the item. In some simple but effective 5S programmes, the red tags will be cleared by quick discussion some that should be kept are disposed of and many that are not required will be kept, and perhaps shared to other departments within the organisation. This can form part of the virtuous circle of PDCA, but for a quick win from Sort you should use your Standardised Work to drive removal of red tags. The red tags should be kept or disposed of based on whether the items are mentioned within the Standardised Work. 

By having Standardised Work where all tools and necessary materials are accounted for, the red tagging leads to either faster removal of unnecessary items or improved Standardised Work. If you don’t have any Standardised Work, you should start writing how to work in an area whilst applying Sort as it helps you know what items are needed. Although you start writing the Standardised Work during Sort, as all 5S are introduced sequentially but together the Standardised Work will also be visualised during Set in Order. 

Once you try to remove any item using red tagging and Standardised Work, the real use of that item is quickly revealed. The item may now need to be included within a revised Standardised Work document or it inclusion agreed through a trial, or the item may need disposal and the proven standards reinforced. Whatever the outcome, if positive discussion and experimentation is used in the spirit of PDCA, progress is being made towards perfection. We are ensuring only that which is required within the workplace is kept within the workplace by applying Sort. Plus, we reinforce Standardised Work and continue to highlight problems which in turn can be solved by ensuring only needed items are kept in an area. As more problems are identified and solved, everyone benefits – KPI’s increase and work satisfaction improves as we strive for perfection in Standardised Work by eliminating problems.

Get Qualified in Lean Manufacturing

Monday, November 30th, 2009

Step over the competition!

The KCTS Lean Manufacturing qualification is an abridged version of training that we have used to catapult major Blue Chip companies, such as Unilever and Saint Gobain into becoming the industry standard in World Class Manufacturing.

Tackle stubborn projects:

The key to our success over other training providers is that we base our workshops around the completion of real live site projects. The result is a demonstrated improvement in your business KPI’s. We achieve this through the application of Lean tools such as;

Problem solving:
Set up reduction (SMED)
Statistical process control
Visual management systems
Value stream mapping
TPM
5S

Lean qualification further information >>

 

 

KCTS Ltd © 2009. All rights reserved. Use of this website signifies your agreement to the Terms of Use.